1088E10 RADIATOR COOLING FAN - R + R - Fiat - STILO - eLearn

3362519 - 1088E10 radiator cooling fan - r + r

) Place the car on a ramp. - 5530B56 BATTERY DRIP TRAY COVER - R.R. . Disconnect the battery negative terminal. - 7055B54 under-engine guard - r r . Lower the lift.Release the radiator bottom pipe from the bands.1. Undo the fixing nuts (1a) and remove the metal protection (1b) for the fan motor.2. Release the electrical wiring from the attachments and disconnect the fan's electrical connection.

	Name	Connector
2	Engine fan adjustment resistor	O10

1. Withdraw the retaining bolt.Raise the lift.2. Turn the fan anti-clockwise and release it from its seating, then remove it from the bottom of the engine compartment.

Refitting ( Removing

) Fit the complete radiator cooling fan by turning it clockwise in its seating.Lower the lift.Tighten the bolt.Secure the electrical wiring on the attachments and connect the fan's electrical connection.

	Name	Connector
-	Engine fan adjustment resistor	O10

Fit the metal protection for the fan motor and tighten the fixing bolts.Secure the radiator bottom pipe to the bands.Raise the lift. - 7055B54 under-engine guard - r r . Lower the lift.Disconnect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R. . Remove the car from the ramp.