3362586 - 1020A46 CRANKCASE OIL SUMP PARTITION - R.R. WITH CRANKCASE SUMP REMOVED
Removing
(
Refitting
)
1. Undo the fixing bolts (1a) and remove the sump bulkhead (1b) fastened to the oil sump.
Refitting
(
Removing
)
Fit the bulkhead and tighten the bolts fixing it to the engine oil sump.
Removing
(
Refitting
)
1. Remove the sump condensed oil return pipe connector.2. Remove the sump condensation oil return inner connector complete with O-Ring seal.3. Undo the bolts (3a) and remove the crankcase oil sump partition (3b).
Refitting
(
Removing
)
Fit the crankcase oil sump partition and secure it tightening the bolts to the recommended torque.| Fastening | Component | Ø | Value(daNm) | |
|---|---|---|---|---|
| - | Bolt | OIL BULK HEAD | M6 | 0.8 ÷ 1.0 |