3362731 - 1820B10 Clutch fluid RESERVOIR - R.R. and washing interior

Removing ( Refitting ) Remove the car from the ramps. - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Disconnect the electrical connection from the clutch brake fluid level sensor.

NameConnector
1Brake fluid level sensor (switch)  K25 
2. Undo the bolt securing the reservoir to the brake pump.3. Disconnect the brake clutch fluid hose from the pump.4. Remove the brake/clutch fluid reservoir.
Refitting ( Removing ) Fit the brake - clutch fluid reservoir into its seat on the brake pump.Connect the brake/clutch fluid pipe to the pump.Tighten the bolt fixing the brake fluid reservoir to the brake pump.Connect the electrical connection to the brake clutch fluid level sensor.

NameConnector
-Brake fluid level sensor (switch)  K25 
- 1820B08 Clutch release HYDRAULIC SYSTEM - Bleeding air and restoring level  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Remove the car from the ramps. Removing ( Refitting ) Remove the car from the ramps.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Disconnect the electrical connection from the clutch brake fluid level sensor.

NameConnector
1Brake fluid level sensor (switch)  K25 
2. Undo the bolt securing the reservoir to the brake pump.3. Disconnect the brake clutch fluid hose from the pump.4. Remove the brake/clutch fluid reservoir.
Refitting ( Removing ) Fit the brake - clutch fluid reservoir into its seat on the brake pump.Connect the brake/clutch fluid pipe to the pump.Tighten the bolt fixing the brake fluid reservoir to the brake pump.Connect the electrical connection to the brake clutch fluid level sensor.

NameConnector
-Brake fluid level sensor (switch)  K25 
- 1820B08 Clutch release HYDRAULIC SYSTEM - Bleeding air and restoring level  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Remove the car from the ramps.