3362856 - 3330D02 brake servo/brake pump assembly - r r

 - 1016A10  sound-proofing cover - r + r  - 5530B56  BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. 1. Disconnect the electrical connection of the water in diesel filter presence sensor (1a), unscrew bolts (1b), release the pipes from the retaining bands and place the diesel filter (1c) to one side.

	Name	Connector
1a	Water in diesel filter sensor	K31

 - 3330C30  brake fluid reservoir - r + r and wash inside - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 3340A13  abs central mount - r r1. Undo clips (1a) to disconnect clip (1b) and disconnect brake servo rod (1c) from brake pedal (1d). 1. Undo the nuts securing the brake servo unit to the pedal assembly. Withdraw the one-way valve from the brake servo assembly.1. Remove the brake servo/brake pump unit.Use the appropriate tool to remove the ABS pipes from the master cylinder.

	Name	Country
-	Spanner	1.856.127.000

Refitting ( Removing ) Fit the brake servo/brake pump assembly and tighten the retaining nuts on the pedal unit to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	BRAKE SERVO	M8	(Pedal end) 2.2

Fi the one-way valve to the brake servo assembly.Fit the detent to the brake servo rod.Fit the brake servo rod to its seat on the brake pedal and secure with the detent.Use the appropriate tool to tighten the ABS pipes to the master cylinder.

	Name	Country
-	Spanner	1.856.127.000

 - 3340A13  abs central mount - r r - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 3330C30  brake fluid reservoir - r + r and wash inside Fit the diesel filter in its seat and tighten the retaining bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FUEL FILTER	M8	(Pedal unit side) 2.5

Connect the electrical connection to the fuel filter water presence sensor.

	Name	Connector
-	Water in diesel filter sensor	K31

 - 1016A10  sound-proofing cover - r + r