3330D20 SINGLE-ACTING VALVE FOR BRAKE SERVO - R+R - Fiat - STILO - eLearn

3362858 - 3330D20 SINGLE-ACTING VALVE FOR BRAKE SERVO - R+R

) 1. Disconnect the electrical connection for the water in the diesel filter sensor (1a), undo the bolts (1b), release the pipes from the retaining bands and place the diesel filter (1c) at the side.

	Description	Connector
1a	Water in diesel filter sensor	K31

1. Release the single-acting valve from the brake servo.2. Release the pipe for the single-acting valve from the retaining band on the vacuum unit and disconnect it.3. Disconnect the pipe to the vacuum reservoir.4. Release the pipe from the retaining bands and remove the single-acting valve complete with pipe.

Refitting ( Removing

) Position the single-acting valve for the brake servo press-fitting it in the housing in the brake servo.Secure the pipe for the single-acting valve to the vacuum unit fastening it using the band.Restore the connection to the connector.Secure the band using the bands removed previously.Place the diesel filter in position and tighten the fixing bolts to torque.

	Fastening	Component	dia	Value(daNm)
-	Bolt	FUEL FILTER	M8	(Pedal assembly side) 2.5

Connect the electrical connection for the water in the filter sensor.

	Description	Connector
-	Water in diesel filter sensor	K31