3362932 - 4410D13 front suspension beam - r r

Removing ( Refitting ) Place the car on a ramp. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 4450B12  front or rear wheels (two) - r+r - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R.  - 1076B50  exhaust pipe attachment to engine - r + r - 1008C30  power unit lower reaction link r r  - 1008C32  GEARBOX LOWER REACTION ROD ' -R.R. - 4410B40  lower wishbone (with balljoint) of left or right front suspension (one) - r+r -check wheel geometry separately1. Undo the bolts securing the anti-roll bar. 2. Undo the bolts securing the steering box to the crossmember. Position a hydraulic jack under the crossmember.3. Undo the bolts securing the crossmember to the bodyshell. Lower the jack and remove the crossmember.
Refitting ( Removing ) Position the crossmember on a hydraulic jack and raise it until the crossmember is fully against the bodyshell.Tighten to torque the bolts securing the crossmember brackets to the bodyshell.

FasteningComponentØValue(daNm)
--ENGINE OR ROD ANCHORAGE BEAMM12 x 1.511.
Tighten to torque the bolts securing the crossmember to the bodyshell.

FasteningComponentØValue(daNm)
--ENGINE OR ROD ANCHORAGE BEAMM14 x 1.515
Tighten to torque the bolts securing the steering box to the crossmember.

FasteningComponentØValue(daNm)
-BoltENGINE OR ROD ANCHORAGE BEAMM12 x 1.258,5
Tighten to torque the bolts securing the anti-roll bar.

FasteningComponentØValue(daNm)
-BoltENGINE OR ROD ANCHORAGE BEAMM82,5
 - 4410B40  lower wishbone (with balljoint) of left or right front suspension (one) - r+r -check wheel geometry separately - 1008C32  GEARBOX LOWER REACTION ROD ' -R.R.  - 1008C30  power unit lower reaction link r r - 1076B50  exhaust pipe attachment to engine - r + r