3363097 - 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.    Op. 5530B10 BATTERY - R+R- Disconnect the engine management unit electrical connections.
DescriptionConnector
-Engine management control unitSee M010 ENGINE MANAGEMENT CONTROL UNIT
Release the wiring from the retaining bands.1. Undo the rear fixing bolt (1a), release the front fastenings (1b) and place the engine compartment junction unit (1c) at the side.
1. Disconnect the electrical coupling.
DescriptionConnector
1Front/engine couplingD004A
1. Remove the battery base (1a) and the battery container (1b) from their housings in the drip tray.
1. Loosen the strut fixing bolts.2. Undo the fixing bolt on the air filter (2a) and the suspension turret (2b).3. Remove the battery drip tray.
Refitting ( Removing ) Position the battery drip tray in its housing and tighten the fixing bolts to the recommended torque.
FasteningComponentdia  Value(daNm)
-BoltBATTERY SUPPORT/CAGEM82.5
Position the battery container and fit it in the housings on the battery drip tray.Connect the electrical coupling.
DescriptionConnector
1Front/engine coupling    D004A
Position the engine compartment junction unit, attach the front fastenings and tighten the fixing bolt.Position the battery base.- Connect the electrical connections for the engine management control unit.
DescriptionConnector
-Engine management control unitSee M010 ENGINE MANAGEMENT CONTROL UNIT
    Op. 5530B10 BATTERY - R+R    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.