1088C20 WATER PUMP - R + R WITH ENGINE REMOVED - Fiat - STILO - eLearn

3363573 - 1088C20 water pump - r + r with engine removed

) Proceed with removal - 1032B16 toothed timing belt - r r with engine removed . 1. Undo the bolt (1a) of the driven pulley using the tools (1b) for counter-torque.

	Name	Country
1b	Support for counter-torque	1.860.831.000

	Name	Country
1c	Support for counter-torque	1.860.831.000

2. Remove the toothed driven pulley.

1. Undo the bolts (1a) and remove the cam angle sensor (1b).

1. Undo the bolts (1a) and remove the water pump (1b) complete with O-Ring (1c).

Refitting ( Removing

) Refit the water pump, complete with a new O-ring, back in its housing and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COOLANT PUMP	M8	(Cylinder head side) 2.3 ÷ 3.3

Place the cam angle sensor back in its housing and fix it using the bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAM ANGLE SENSOR	-	0.8 - 1.2

Refit the toothed driven timing pulley into its housing.Tighten the driven pulley bolt to the specified torque using the tools for counter-torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING DUCT PULLEY	M12	11.0 ÷ 15.9

	Name	Country
1b	Support for counter-torque	1.860.831.000

	Name	Country
1c	Support for counter-torque	1.860.831.000

Proceed with refitting - 1032B16 toothed timing belt - r r with engine removed .