1036B14 OVERHEAD CAMSHAFT - R R ON VEHICLE - WITH CYLINDER HEAD REMOVED - Fiat - STILO - eLearn

3363582 - 1036B14 overhead camshaft - r r on vehicle - with cylinder head removed

) Take the cylinder head to the workbench.1. Undo the stud, using the nut and locknut.2. Fit tool (2a) to cylinder head (2b) and secure using nuts (2c).

	Name	Country
2a	Drift	1.860.460.000

1. Undo the bolts (1a) and remove the vacuum unit (1b) complete with O-Ring (1c).

1. Undo the bolt (1a) for the driven pulley using the tools (1b).

	Name	Country
1b	Support for counter-torque	1.860.831.000

	Name	Country
1b	Counter-torque	1.860.831.001

2. Remove the toothed driven pulley.

1. Undo the camshaft cap bolts.2. Remove the camshaft support lubrication pipe.3. Remove the camshaft caps.4. Remove the camshaft.5. Remove the camshaft front oil seal.

Refitting ( Removing

) Fit the camshaft.Fit the camshaft caps.Fit the camshaft support lubrication pipe.Tighten the camshaft cap bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	(Cylinder head side) 1.4 ÷ 2.0

1. Fit a new camshaft front oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.824.000

Fit the driven pulley.Tighten the driven pulley bolt to the specified torque using the tool.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	TIMING DUCT PULLEY	M12	(Cylinder head side) 11.0 ÷ 15.9

	Name	Country
1b	Support for counter-torque	1.860.831.000

	Name	Country
1b	Counter-torque	1.860.831.001

Fit the vacuum unit, complete with O-Ring, and fix it tightening the bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BRAKE SERVO VACUUM PUMP	M8	(Cylinder head side) 2.3 ÷ 3.3

Remove the cylinder head from the supporting tools.Remove the cylinder head support tools from the vice and return them.