3362393 - 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Disconnect the electrical connection for the injector.
DescriptionConnector
1InjectorN070
2. Unscrew the nut securing the intake manifold and position the power unit support bracket.3. Position a beam lengthways by resting on the suspension domes.
DescriptionCodeFunction
3Crossmember1.870.595.000Engine mount
4. Position beam (4a) crossways, rest the front part (4b) on the sacrificial beam and secure the rear part to the beam positioned previously using bolt (4c).
DescriptionCodeFunction
4aCrossmember1.860.851.000Engine mount
DescriptionCodeFunction
4bVertical support1.870.748.000Engine mount
5. Use a hook to secure the crossmember to the bracket secured previously.
Refitting ( Removing ) Fit the flexible mounting in the housing in the engine compartment.Tighten the bolts securing the flexible mounting to the body to torque.
Value daNmFasteningComponentØ  
-2.5Bolt-M8
Tighten the nut fixing the block to the rigid mounting to torque.
Value daNmFasteningComponentØ  
-9Nut-M12
Remove the engine support tools positioned previously and connect the injector electrical connection.
DescriptionCodeFunction
-Crossmember1.870.595.000Engine mount
DescriptionCodeFunction
-Crossmember1.860.851.000Engine mount
DescriptionCodeFunction
-Vertical support1.870.748.000Engine mount
DescriptionConnector
-InjectorN070
    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.