4CarData
eLearn
Контакты
English
da 01/04 (from 01/04)
Da 05/2005 (from 05/2005)
da 07/02 a 06/03 (from 07/02 till 06/03)
da 07/03 a 12/03 (from 07/03 till 12/03)
Fino a 04/2005 (till 04/2005)
Fino a 06/02 (till 06/02)
FIAT
STILO
1.9 JTD 8V
PROCEDURES
72 PANELS AND FRAMES
7210 REMOVING-REFITTING
7210E EXTERNAL PARTS
7210E10 R.R. FRONT BUMPER
3363534 - 7210E10 R.R. FRONT BUMPER
Removing
(
Refitting
)
Place the car on a lift.
-
7055B54 under-engine guard - r r
-
7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
-
4450B12 front or rear wheels (two) - r+r
1. Undo the upper fixing bolts.
Raise the lift halfway.
2. Undo the side fixing bolts at the wheel arch on both sides.
Raise the lift.
3. Undo the fixing bolts (3a) and remove the front bumper (3b).
Refitting
(
Removing
)
Check that the bumper is undamaged.
Place the bumper in position.
Tighten the lower bolts fixing the bumper.
Lower the lift fully.
Tighten the side fixing bolts at the wheel arch on both sides.
Lower the ramp.
Tighten the upper bolts.
-
4450B12 front or rear wheels (two) - r+r
-
7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
-
7055B54 under-engine guard - r r
Remove the vehicle from the lift.