3360248 - I38 SIDE TURN SIGNAL (ONE) RH OR LH NOT WORKING

Turn signals are controlled and diagnosed (light check function) directly from the Body Computer Node.
Results of the tests
1CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the diagnostic equipment to the test input and check:

  • for faults in the turn signals
  • check turn signal operation by means of active diagnosis
Continue to Step 5Turn signal fault Continue following the instructions given by the diagnostic equipment
Bulb does not come on Continue to Step 2
2CHECK TURN SIGNAL BULB CONDITIONAll OKProblems metOperation
Check condition of turn signal bulb Continue to Step 3Bulb blown Replace the side repeater Op.   5550C22 
3CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check light earth See   E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS Continue to Step 4Earth brokenRestore the connection See   E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS
4CHECKING ELECTRICAL EQUIPMENTAll OKProblems metOperation
Check the continuity of the wiring between front light and Body Computer Node See   E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS Continue to Step 5Wiring broken Renew the electrical connections See   E2020  DIRECTION INDICATORS / HAZARD WARNING LIGHTS
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present Fault persistsReplace the Body Computer Op. 5505A32Search for the fault starting from another symptom'