3360274 - K48 I.E. FAILURE WARNING LIGHT FLASHING

The MIL failure warning light flashes when the engine has been started
The warning light can flash in two different ways: with the vehicle started up and stationary or with the vehicle driving.
Results of the tests
1CHECK ON FUEL RESERVE WARNING LIGHTAll OKProblems metOperation
Check that the fuel reserve warning light is offContinue to Step 2Fuel reserve warning light onMake sure the fuel level is above the reserve areaContinue to Step 4
2FUEL LEVEL CHECKAll OKProblems metOperation
Check that the fuel gauge is working properlyContinue to Step 3Fuel gauge not working See table   K20  FUEL LEVEL GAUGE NOT WORKING
3CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the diagnostic equipment (Examiner or Examiner Plus) and check:

  • that there is no 'Misfire' error
End of diagnosisThe 'Misfire' error is present See table   Z53  MISFIRE ERROR
4DELETING AND CHECKING ERRORAll OKProblems metOperation
Use a tester to cancel the errors in the control unit.Carry out a road test and ensure the error does not recurContinue to Step 5The 'Misfire' error is present See table   Z53  MISFIRE ERROR
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentFault persistsSearch for the fault starting from another symptom'