3360335 - P41 DOORS DO NOT OPEN / VEHICLE WITH PASSIVE ENTRY

The automatic opening system does not work when the switch on the door handle is pressed.
The function is activated only with the car locked and allows the active door to be opened via CID recognition and all other doors to be released. The Passive Entry system strategy is managed by the passive entry Node, while the driver's door node, passenger door node and the boot node (if present) activate the door opening motors (electric locks).
Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation
Check CID battery charge statusContinue to Step 1battery charge insufficient.Change CID battery
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the examiner and check for errors:

  • in the radio aerial
  • in a door aerial
Continue to Step 3RF aerial damagedRestore radio aerial continuity/insulation :
Door aerial (one) damagedProceed to step 2
2CHECKING ELECTRICAL CIRCUITAll OKProblems metOperation

Check continuity/insulation of the electrical connection between:

Continue to Step 7Electrical connection broken or not insulatedRestore electrical connection continuity/insulation See   E7018  PASSIVE ENTRY
3CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keep the Examiner connected and check for errors in the door external handle switch.Continue to Step 8No signalContinue to Step 4
4CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Check the exterior handle switch has been correctly downloaded while in parameter mode.Continue to Step 8No signalContinue to Step 5
5CHECKING ELECTRICAL CIRCUITAll OKProblems metOperation
Check continuity/insulation of the electrical connection between exterior handle and door catch. See   E7018  PASSIVE ENTRY Continue to Step 6Electrical connection broken or not insulatedRestore electrical connection continuity/insulation See   E7018  PASSIVE ENTRY
6CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persistsIf front door, change the exterior handle Op.   7005C11 
The fault persistsIf rear door, change the exterior handle Op.   7010C11 
7CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persistsIf front door aerial, change the defective aerial Op.   5580E72 
The fault persistsIf rear door aerial, change the defective aerial Op.   5580E74 
8CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentThe fault persistsChange the passive entry node Op.   5580E70  Search for the fault starting from another symptom'