1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. - Fiat - STILO - eLearn

3362390 - 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

) 1016A10 COPERCHIO INSONORIZZANTE - S.R.1. Undo the retaining bolts.2. Disconnect the coolant recirculation pipe.3. Replace the power assisted steering fluid reservoir to one side.

Position a hydraulic device for supporting the engine under the engine oil sump.1. Undo the nuts fixing the rigid support to the pressure pump mounting.2. Undo the bolts (2a) securing the support to the bodyshell and the bolts (2b) securing the support to the fuel filter bracket.3. Remove the rigid engine support, complete with flexible mounting.The flexible mounting cannot be dismantled from the rigid support.

Refitting ( Removing

) Fit the rigid engine support, complete with flexible mounting.Tighten the bolts securing the rigid support to the bodyshell to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10 X 1.25	(Bodyshell side) 5

Tighten the nuts fixing the rigid mount to the pressure pump mount to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	RIGID ENGINE MOUNT, TIMING SIDE	M12 X 1.25	(Engine side) 7.5

Position a hydraulic device for supporting the engine under the engine oil sump.Fit the power steering fluid reservoirConnect the coolant recirculation pipe to the reservoir.Tighten the engine coolant reservoir fixing bolts. 1016A10 COPERCHIO INSONORIZZANTE - S.R.