3362409 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Place the car on a lift. - 4450B04  right front wheel r r .  - 1016A10  sound-proofing cover - r + r . Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

 - 7055B54  under-engine guard - r r .  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. .  - 1092G10  single engine belt r r .  - 1092G14  engine component single belt mobile tensioner - r + r .  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed - 1032D12  timing system protective cover(s) - r + r .  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .  - 1032B44  toothed drive pulley - r + r with timing belt removed . Remove the oil seal from the housing in the front cover.

The operation of removing the oil seal destroys it, therefore it must always be replaced.

Refitting ( Removing ) 1. Fit a new oil seal (1a) by using tool (1b) to insert into its seat on the front cover.

	Name	Country
1b	Fitting tool	1.860.816.000

 - 1032B44  toothed drive pulley - r + r with timing belt removed .  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .  - 1032D12  timing system protective cover(s) - r + r .  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed - 1092G14  engine component single belt mobile tensioner - r + r .  - 1092G10  single engine belt r r .  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. .  - 7055B54  under-engine guard - r r . Connect the battery negative terminal.

	Name	Connector
-	Battery	A1B

 - 1016A10  sound-proofing cover - r + r .  - 4450B04  right front wheel r r . Remove the vehicle from the lift.