3362921 - 4410A10 l/h or r/h front suspension spring/damper unit (one) - r+r - check wheel geometry separately if necessary

Removing ( Refitting ) Position the vehicle on the ramp. - 4450B10  Front WHEEL (one) - R.R.Prise off the brake caliper fluid pipe and the pad wear sensor wiring from the shock absorber mounting.1. Undo the bolts securing the shock absorber to the steering knuckle.2. Undo the nut securing the anti-roll bar joint to the shock absorber.
1. Hold the rod so it does not rotate then undo the nut securing the upper shock absorber mounting to the bodyshell (1a) and remove the buffer (1b).2. Remove the front shock absorber.
Refitting ( Removing ) Position the shock absorber/front suspension spring unit.1. Fit the upper block (1a) and tighten the nut (1b).
Tighten the bolts fixing the shock absorber to the steering knuckle to the specified torque.

FasteningComponentØValue(daNm)
-BoltFRONT DAMPERM107,5
Tighten the nut securing the anti-roll bar joint to the shock absorber to the recommended torque.

FasteningComponentØValue(daNm)
-NutFRONT DAMPERM105,1
Fit the brake caliper pipe. - 4450B10  Front WHEEL (one) - R.R.Lower the vehicle with the wheels resting on the ground.Secure the shock absorber stem and tighten the retaining nut of the upper mounting.

FasteningComponentØValue(daNm)
-NutFRONT DAMPERM126