3363083 - 5520B10 starter motor - r+r

Removing ( Refitting )  - 1076B50  exhaust pipe attachment to engine - r + r - 1008C30  power unit lower reaction link r r - 1008C34  BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R.1. Open the protective cover for the starter motor wiring.2. Disconnect the starter motor wiring.

	Name	Connector
2	Starter' motor	A20

3. Release the electrical wiring from the securing bands.4. Undo the bolts securing the starter motor to the bellhousing. 1. Remove the starter motor, passing it through the suspension crossmember and power unit. Refitting ( Removing ) Fit the starter motor in its seating on the bellhousing.Tighten the bolts securing the starter motor to the bellhousing to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STARTER MOTOR	M8	2.7

Connect the starter motor wiring.

	Name	Connector
-	Starter' motor	A20

Close the starter motor wiring protective cover. - 1008C34  BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R. - 1008C30  power unit lower reaction link r r - 1076B50  exhaust pipe attachment to engine - r + r