1060F30 SINGLE FUEL MANIFOLD PIPE - R.R. - Fiat - STILO - eLearn

3362663 - 1060F30 SINGLE FUEL MANIFOLD PIPE - R.R.

) 1016A10 sound-proofing cover - r + r. Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

1. Push clips (1a) by hand and disconnect the pipe from the injectors to the fuel recovery manifold (1b), injectors side and move it aside.2. Undo the connectors (2a), (2b) and remove the pipe from the fuel manifold to the injectors (2c).

Use new pipes from from fuel manifold to injectors upon reassembly.

1. Disconnect the electrical connection from the fuel pressure sensor.

	Name	Connector
1	Fuel pressure sensor	K83

2. Undo the bolts (2a) and remove the single fuel manifold pipe (2b) complete with fuel pressure sensor (2c).

Refitting ( Removing

) 1. Place the single fuel manifold pipe (1a), complete with fuel pressure sensor (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	INJECTOR FUEL MANIFOLD (DIESEL)	M8	2.5

2. Connect the electrical connection to the fuel pressure sensor.

	Name	Connector
2	Fuel pressure sensor	K83

1. Fit new pipes from the fuel manifold to the injectors and fix them using the connectors without tightening them.2. Tighten the connectors for the pipes from the fuel manifold to the injectors, injector side, to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
2	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12 x 1.5	(Injector side) 2.3

3. Tighten the connectors for the pipes between the fuel manifold and the injectors, fuel manifold side to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
3	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12 x 1.5	(Manifold side) 2.3

Clean the threaded seats for the above-mentioned pipe on the manifold and the injectors using heptane.

4. Connect the pipe from the injectors to the fuel recovery manifold (4a) to the injectors pushing it until the clips (4b) can be heard clicking into place.

Connect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Op. 1060F20 PIPE FROM PRESSURE PUMP TO FUEL MANIFOLD - R.R. 1016A10 sound-proofing cover - r + r.