3362664 - 1060F34 lines to injectors - r r

Removing ( Refitting )  - 1016A10  sound-proofing cover - r + r1. Undo the connectors (1a) and (1b) and remove the pipes from the fuel manifold to the injectors (1c).

When refitting, use new pipes from the fuel manifold to the injectors.

Refitting ( Removing ) 1. Fit new pipes from the fuel manifold to the injectors and fix them using the connectors without tightening them.2. Tighten the connectors for the pipes from the fuel manifold to the injectors, injector side, to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
2	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12 x 1.5	(Injector side) 2.3

3. Tighten the connectors for the pipes between the fuel manifold and the injectors, fuel manifold side to the recommended torque using a suitable spanner.

	Fastening	Component	Ø	Value(daNm)
3	Connector	FUEL MANIFOLD LINE TO INJECTORS	M12 x 1.5	(Manifold side) 2.3

Clean the threaded seats for the above-mentioned pipe on the manifold and the injectors using heptane.

 - 1016A10  sound-proofing cover - r + r