3362691 - 1076B50 exhaust pipe attachment to engine - r + r

Removing ( Refitting ) Position the vehicle on a lift.Raise the car. - 7055B54  under-engine guard - r r1. Undo the nuts securing the first exhaust pipe section to the catalytic preconverter.2. Undo the nuts securing the first exhaust pipe section to the catalytic converter.3. Remove the first section of exhaust pipe complete with gaskets. Refitting ( Removing ) Fit the exhaust pipe gasket.Fit the front section of the exhaust pipe.Secure the pins to the relevant rubber blocks.Tighten the nuts securing the exhaust pipe to the catalytic converter.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST PIPE TO ENGINE	M8	(Catalyzer) 2.5

Tighten the nuts securing the exhaust pipe to the catalytic preconverter.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	EXHAUST PIPE TO ENGINE	M8	(Catalytic pre-converter) 2.5

 - 7055B54  under-engine guard - r rLower the lift and remove the vehicle from the lift.