3362740 - 1820B46 RIGID supply PIPE from (pump) - master cylinder R.R .

Removing ( Refitting ) Remove the car from the ramps. - 4450B02  left front wheel r r . Remove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. - 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 7055B54  under-engine guard - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1048B44  heat exchanger/manifold pipe - r r1. Remove the clip (1a) and disconnect the rigid pipe (1b) from the operating cylinder. 1. Lift up the clip and disconnect the clutch release control cylinder flexible pipe.2. Remove the pipe from the engine compartment. Refitting ( Removing ) Fit the pipe in the engine bay and connect it to the rigid section of the clutch release cylinder.Connect the rigid pipe to the master cylinder (pump). - 0010T67  hydraulic clutch system bleed air - 1048B44  heat exchanger/manifold pipe - r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54  under-engine guard - r r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r  - 4450B02  left front wheel r r