3362760 - 2125C30 GEAR ENGAGEMENT/SELECTION CABLES - R.R

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R1. Remove the clips securing the cables to the bracket.2. Release the two ends (2a) and release the gear selector and engagement cables (2b) from the bracket.
    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 1076B26 INTERMEDIATE EXHAUST SILENCER - R+R    Op. 1076B42 CENTRAL EXHAUST PIPE COMPLETE WITH FLEXIBLE CONNECTION - CATALYTIC CONVERTOR AND CENTRAL SILENCER - R.R.    Op. 1080B62 CATALYTIC CONVERTER - R + R    Op. 1076B42 CENTRAL EXHAUST PIPE COMPLETE WITH FLEXIBLE CONNECTION - CATALYTIC CONVERTOR AND CENTRAL SILENCER - R.R.     1076A48 RIPARO CALORE per convertitore catalitico - S.R.
It is advisable to retighten the two bolts fixing the support to the bodyshell in order to facilitate the operation of removing the flexible cables from the support.
1. Remove the protective cover (1b) working on the fixing bolts (1a).2. Release the ends (2a) of the selector and engagement cables from the lever and from the idler (2b).3. Remove the fastening springs and release the two flexible cables from the mounting.4. Open the retaining band (4a) and remove the two transmission cables (4b) from the vehicle.
Refitting ( Removing ) Fit the ends of the selector and engagement cables on the lever and on the idler.Fit the fastening springs for the two flexible cables on the support.Fit the protective cover in the housing on the support and tighten the fixing bolts.    1076A48 RIPARO CALORE per convertitore catalitico - S.R.    Op. 1076B18 RIGID SECTION OF EXHAUST PIPE BETWEEN CATALYTIC CONVERTER AND SILENCER - R + R    Op. 1076B26 INTERMEDIATE EXHAUST SILENCER - R+R    Op. 1076B42 CENTRAL EXHAUST PIPE COMPLETE WITH FLEXIBLE CONNECTION - CATALYTIC CONVERTOR AND CENTRAL SILENCER - R.R.    Op. 1080B62 CATALYTIC CONVERTER - R + R    Op. 1076B42 CENTRAL EXHAUST PIPE COMPLETE WITH FLEXIBLE CONNECTION - CATALYTIC CONVERTOR AND CENTRAL SILENCER - R.R. Fit the gear selection and engagement flexible cables and press fit the ends on the fastening ball pins.- Position the gear lever in contact with the reverse gear inhibitor partition.1. Position the spacer and a 1.5 mm thick washer beneath the gear engagement lever to achieve an overall height (spacer + washer) of 19 mm.
DescriptionCodeFunction
1Spacer1.860.974.000Adjusting flexible cables
Connect the end of the gear selector self-adjusting flexible cable.Secure the transmission cable to the mounting bracket engaging the fastening clip in the housing.Connect the end of the gear engagement self-adjusting flexible cable.Secure the transmission cable to the mounting bracket engaging the fastening clip in the housing.Place the gear lever in Reverse and remove the tool and the washer positioned under the gear engagment lever.
DescriptionCodeFunction
-Spacer1.860.974.000Adjusting flexible cables
    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.ROp. 5530B10 BATTERY - R+R    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.