3363109 - 5540B40 CONTROL UNIT IN LEFT GAS DISCHARGE LIGHT CLUSTER - R.R.

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Op. 5530B10 BATTERY - R+R Disconnect the engine management unit electrical connections.

	Description	Connector
-	Engine management control unit	M10

Release the wiring from the retaining bands.1. Undo the rear fixing bolt (1a), release the front fastenings (1b) and place the engine compartment junction unit (1c) at the side. 1. Disconnect the dashboard/engine electrical connection.

	Description	Connector
1	Dashboard/i.e. coupling	See D23 DASHBOARD/I.E. CONNECTION

1. Remove the battery container from its housing in the drip tray. 1. Disconnect the left front light cluster electrical connection.

	Description	Connector
1	Left headlamp	F10

1. Open the retaining clip for the headlamp alignment control unit support, in the direction shown by the arrow.2. Undo the bolt fixing the headlamp alignment control unit support to the light cluster. 1. Release the support complete with control unit from the housing on the lamp.- Rest the headlamp alignment control unit support on the base of the battery drip tray so that the bolts securing the actual control unit are accessible.

Warning: The support complete with control unit cannot be removed from the housing because it forms one piece with the front wiring.

2. Undo the fixing bolts (2a) and separate the headlamp alignment control unit (2b) from the support. Refitting ( Removing ) Position the headlamp alignment control unit on the support and secure it using the bolts.Fit the support complete with control unit in place on the light cluster.Tighten the bolt fixing the control unit support to the light cluster.Close the retaining clip on the headlamp alignment control unit support.Connect the left front light cluster electrical connection.

	Description	Connector
-	Left headlamp	F10

Position the battery container and fit it in the housings on the battery drip tray.Connect the dashboard/engine electrical connection.

	Description	Connector
-	Dashboard/i.e. coupling	See D23 DASHBOARD/I.E. CONNECTION

Position the engine compartment junction unit, attach the front fastenings and tighten the fixing bolt.Connect the electrical connections for the engine management control unit.

	Description	Connector
-	Engine management control unit	See M010 ENGINE MANAGEMENT ECU

Op. 5530B10 BATTERY - R+R    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.