3363115 - 5540B55 DIPPED HEADLAMP FOR LEFT GAS DISCHARGE LIGHT CLUSTER - R.R.

Removing ( Refitting )     Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Op. 5530B10 BATTERY - R+R Disconnect the engine management unit electrical connections.
DescriptionConnector
-Engine management control unit    M10
Release the wiring from the retaining bands.1. Undo the rear fixing bolt (1a), release the front fastenings (1b) and place the engine compartment junction unit (1c) at the side.
1. Disconnect the dashboard/engine electrical connection.
DescriptionConnector
1Dashboard/engine couplingSee D23 DASHBOARD/I.E. CONNECTION
1. Remove the battery container from its housing in the drip tray.
1. Disconnect the left front light cluster electrical connection.
DescriptionConnector
1Left headlamp    F10
1. Open the retaining clip for the headlamp alignment control unit support, in the direction shown by the arrow.2. Undo the bolt fixing the headlamp alignment control unit support to the light cluster.
1. Release the support complete with control unit from the housing on the lamp.Move the support complete with headlamp alignment control unit outside of the work area.
1. Open the retaining springs.2. Remove the gas discharge dipped headlamp bulb complete with bulb holder from its housing on the lamp.
1. Rotate the gas discharge dipped headlamp bulb (1a) in the direction shown by the arrow and separate it from the bulb holder (1b).
Refitting ( Removing ) Fit the gas discharge dipped headlamp bulb in place on the bulb holder.Fit the gas discharge dipped headlamp bulb complete with bulb holder in the housing on the lamp.Close the retaining clip.Fit the support complete with control unit in place on the light cluster.Tighten the bolt fixing the control unit support to the light cluster.Close the retaining clip on the headlamp alignment control unit support.Connect the left front light cluster electrical connection.
DescriptionConnector
-Left headlamp    F10
Position the battery container and fit it in the housings on the battery drip tray.Connect the dashboard/engine electrical connection.
DescriptionConnector
-Dashboard/i.e. couplingSee D23 DASHBOARD/I.E. CONNECTION
Position the engine compartment junction unit, attach the front fastenings and tighten the fixing bolt.Connect the electrical connections for the engine management control unit.
DescriptionConnector
-Engine management control unit    M10
    Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Op. 5530B10 BATTERY - R+R