3363191 - 7005A14 front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment

Look to ensure the gap between door and outer profile is even.
1. Slacken the bolts on the body side (1a) and door side (1b) of the door check strap (1c).
To adapt the door transversally to the door seal, carry out the operations below.1. Slacken the bolts (1a) securing the door striker (1b).
1. Slacken the bolts (1a), door side, securing the door hinge (1b).
It is advisable to work on one hinge at a time.
On completion of adjustment, tighten the door hinge bolts and door lock striker bolts to torque.

FasteningComponentØValue(daNm)
-BoltSTRIKER ON FRONT SIDE DOOR PILLARM82.4

FasteningComponentØValue(daNm)
-BoltFRONT SIDE DOOR HINGESM8(Door) 3
To adjust the door in the vertical and longitudinal direction, carry out the following operations.1. Slacken the bolts (1a), bodywork side, securing the door hinge (1b).
It is advisable to work on one hinge at a time.
On completion of adjustment, tighten the door hinge bolts on the body side to torque.

FasteningComponentØValue(daNm)
-BoltFRONT SIDE DOOR HINGESM8(Outside of bodyshell) 3.2

FasteningComponentØValue(daNm)
-BoltFRONT SIDE DOOR HINGESM8(Internal bodyshell side) 3
1. The figure shows the possible movements of the hinge for the transversal adaptation of the door to the door seal (1a), via the slotted hole (1b), for adjustment in the vertical direction (1c) and longitudinal direction (1d) through the slotted holes (1e).
At the end of each adjustment, tighten the door check strap bolts to torque.

FasteningComponentØValue(daNm)
-BoltFRONT DOOR OPENING LIMITERM6(door) 1.2