7010N20 REAR SIDE DOOR LOCK MOTOR/CATCH ASSEMBLY - R R WITH DOOR PANEL AND SUPPORT FRAME REMOVED - Fiat - STILO - eLearn

3363285 - 7010N20 rear side door lock motor/catch assembly - r r with door panel and support frame removed

) 1. Disconnect the electrical connectorfor the motor/central locking assembly.

	Name	Connector
1	Left rear. door lock geared motor	N55

	Name	Connector
1	Rear door lock geared motor right	N56

2. Disconnect the flexible cable for opening the door via the interior handle.3. Disconnect the rod, complete with knob, for the door safety device.4. Remove the motor/central locking assembly (3a), acting on the retaining springs (3b).

Refitting ( Removing

) Fit the motor/central locking assembly, securing it to the retaining springs.Make sure that the retaining springs are correctly fitted in the housings in the motor/central locking assembly.Connect the rod, complete with knob, for the door safety device. Connect the flexible cable for opening the door via the interior handle.Connect the electrical connector for the motor/central locking assembly.

	Name	Connector
-	Left rear. door lock geared motor	N55

	Name	Connector
-	Rear door lock geared motor right	N56