3363419 - 7045A78 Front seat BACKREST FRAME. (one), left or right - R.R.

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 7045A10  l/h or r/h front seat (one) - r+r - 7045B10  l/h or r/h front seat head restraint - r+r1. Working from the outside using suitable equipment (1a), insert the bush at around 45° and push the retaining tab (1c), in the direction shown by the arrow (1b), towards the inside of the bush, releasing it from the housing (1d). Carry out the same operation for the remaining retaining tab.2. Release the bush from the housing and remove it.  - 7045A48  LEVER and TRIM for folding backrest - R.R. - 7045A24  squab knob - r r - 7045A52  squab rake adjustment device outer guard one lh or rh r r - 7045A54  squab rake adjustment device inner guard one lh or rh r r Remove the cover complete with upholstery from the backrest frame, without separating the cover from the upholstery at the bench;  - 7045D31  Front seat BACKREST COVER, left or right - R.R. with seat removed1. Disconnect the flexible cables from the backrest/cushion join on both sides. 1. Undo the bolt fixing the backrest folding device. 1. Push in the direction shown by arrow (1a) and then in the direction shown by arrow (1b).2. Remove the backrest folding device and cables from the housing. 1. Undo the nuts (1a) fixing the side Air Bag module (1b). 1. Undo the fixing bolt and disconnect the side Air Bag module earth lead.2. Release the electrical wiring for the side Air Bag module from the retaining springs on the backrest frame. 1. Undo the bolts fixing the backrest frame to the cushion frame on both sides. Remove the squab frame. Refitting ( Removing ) Position the backrest frame and tightne the bolts fixing the frame to the cushion frame to torque.Position the side Air Bag module earth lead and secure it using the bolt.Secure the side Air Bag module electrical wiring to the retaining bands on the backrest frame.Place the side Air Bag module in position and tighten the fixing nuts to torque.Fit the backrest folding device complete with cables in place and reroute the flexible cables.1. Connect the flexible cables to the backrest/cushion join on both sides. Check that the backrest folding device is working properly. Fit the cover completely with upholstery on the backrest frame:  - 7045D31  Front seat BACKREST COVER, left or right - R.R. with seat removed - 7045A54  squab rake adjustment device inner guard one lh or rh r r - 7045A52  squab rake adjustment device outer guard one lh or rh r r - 7045A24  squab knob - r r - 7045A48  LEVER and TRIM for folding backrest - R.R.Fit the bush in the housing, checking that it is correctly inserted. - 7045B10  l/h or r/h front seat head restraint - r+r - 7045A10  l/h or r/h front seat (one) - r+r - 5530B56  BATTERY DRIP TRAY COVER - R.R.Connect the battery negative terminal.