3362735 - 1820B38 hydraulic clutch actuator r r and bleed air with gearbox removed
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the hydraulic clutch actuator
(1b).
Refitting
(
Removing
)
Clean any residues of sealant from the
matching surfaces between the hydraulic clutch actuator and the gearbox.Apply silicone sealant to the matching
surface of the hydraulic clutch actuator and the gearbox.Fit the hydraulic clutch acutuator and
secure it by tightening the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CLUTCH CONTROL HYDRAULIC ACTIVATOR | M8 | (Gearbox side) 0.6 ÷ 1.2 |