3360182 - C05 AUTOMATIC-MANUAL SHIFT
The vehicle switches to manual by itself when driving in automatic| Results of the tests | ||||
| 0 | CONTROL UNIT ERRORS CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that there are no errors in the control unit. In particular:
| Continue to Step 3 | Presence of one or more of the errors included in the list | Continue to Step 1 | |
| 1 | CHECKS ON FAULTS DETECTED | All OK | Problems met | Operation |
| Check the faults See Test 2127I What to do depending on the error' present in the Selespeed control unit No accelerator pedal information. | End of diagnosis | Connections faulty | Restore/replace the wiringContinue to Step 2 | |
| 2 | AFTER THE CHECKS ON FAULTS DETECTED | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 5 | |
| 3 | AUTO BUTTON CHECK | All OK | Problems met | Operation |
| Check that the auto button is working properly See Test 2127H CHECK ON AUTO BUTTON (AUTOMATIC OPERATION SELECTION) | Continue to Step 5 | The button is not working properly | Check the state of the connections and the wiring. Repair/replace the part that is not working.Continue to Step 4 | |
| There is no change of state and/or the word 'AUTO' is not displayed | Check the button and the wiring.Continue to Step 4 | |||
| 4 | AFTER THE CHECK ON THE CORRECT OPERATION OF AUTO BUTTON | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 5 | |
| 5 | THE FAULT PERSISTS | All OK | Problems met | Operation |
| Contact Technical Service for further information on the problem | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |