| | Results of the tests |
| 0 | CHECK THAT THE CLUTCH IS NOT DRAGGING | All OK | Problems met | Operation |
|---|
| Check
that the clutch is not dragging See Test 2127I What to do depending on the error' present in the Selespeed control unit No accelerator pedal information. | Continue to Step 2 | The clutch drags | Proceed with checking the
clutch/flywheel kit and, if necessary, replace any components that
do not conform.Continue to Step 1 |
| 1 | AFTER THE INTERVENTION ON
THE CLUTCH KIT | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 2 |
| 2 | CHECK THAT THE FAULT IS NO LONGER
PRESENT | All
OK | Problems
met | Operation |
|---|
| Contact
Technical Service for further information on the problem | End of diagnosis | The fault persists | Search for the
fault starting from another symptom' |