3360360 - Z60 EOL NOT PROGRAMMED IN BODY COMPUTER CONFIGURATION ERROR

The diagnostic equipment signals the error: C1100 - EOL configuration not programmed in the Body Computer
This error is signalled if the ABS-VDC control unit has never received a vehicle configuration from the Body Computer
Results of the tests
1PROXI ALIGNMENT BY BODY COMPUTERAll OKProblems metOperation
Connect the diagnostic equipment, turn the ignition key ON and, in the active diagnosis ambient at the Body Computer control unit, request the PROXI alignment.The ABS control unit should not appear amongst the control units for which the latter is requiredContinue to Step 2The ABS control unit requires PROXI alignment Carry out the PROXI alignment for the ABS control unit
2CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Turn the key to the OFF position and then the ON position to ensure that the control unit checks whether the PROXI alignment has been successful. Check that the fault is no longer presentEnd of diagnosis.