3360376 - Z76 TEMPORARY INTERFERENCE ERROR

The diagnostic equipment signals the following error: C1506 Temporary interference
This error is signalled if the control unit detects interference or incorrect signals at one or more of the wheel sensors.
Results of the tests
1ELECTRICAL CHECKSAll OKProblems metOperation
Check that there is no interference at the system wiring.

In particular, check that there are no:

  • Components fitted in the after market
Sources of electromagnetic waves, such as cell phonesAlso check that there are no faults at the wiring
Continue to Step 2Wiring faulty Renew the wiring
Accessories fitted in the after market that are creating interference Electromangetically insulate the components that have been incorrectly fitted. If this is not possible, advise the customer to have these components removed.
The error was caused by electromagnetic waves. Continue to Step 2
2CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Delete the errors using the diagnostic equipment.Carry out an engine starting cycle to make the control unit check whether there are still errors present and check that the fault is no longer present using the ExaminerEnd of diagnosis.