1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Fiat - STILO - eLearn

3362500 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

Op. 1080E62 PIPE FROM ACTIVE CHARCOAL FILTER TO SOLENOID VALVE - R.R.

) Position the vehicle on a lift. Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Make sure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-). 1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R..1. Disconnect the rapid connector for the fuel vapour recovery pipe and release the pipe from the fastenings.

Raise the vehicle on the lift. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R..1. Undo the nut (1a) and the bolt (1b), then move the modular intake manifold mounting bracket (1c).2. Disconnect the electrical connection from the fuel vapour enablement solenoid valve.

	Description	Connector
2	Fuel vapour recovery solenoid valve	L10

3. Disconnect the supply pipe to the modular intake manifold from the solenoid valve.4. Undo the bolts (4a) and remove the fuel vapour enablement solenoid valve (4b), complete with bracket (4c) and pipe (4d).

Refitting ( Removing

) Position the fuel vapour enablement solenoid valve in its housing, complete with bracket and pipe, and secure it using the bolts.Connect the supply pipe to the modular intake manifold to the solenoid valve.Connect the electrical connection for the fuel vapour enablement solenoid valve.

	Description	Connector
-	Fuel vapour recovery solenoid valve	L10

Position the modular intake manifold mounting bracket in its housing and secure it using the nut and the bolt. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R..Lower the vehicle on the lift.Connect the rapid connector for the fuel vapour recovery pipe and fasten the pipe. 1016A40 COPERCHIO BOBINE accensione su testa cilindri - S.R..Connect the negative battery terminal (-). Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.Remove the vehicle from the lift.