3362607 - 1036C40 timing variator on inlet camshaft in cylinder head r + r with shaft removed
Removing
(
Refitting
)
Position the inlet side camshaft in a vice
fitted with protective jaws.1. Remove the variable valve timing (1a) from the inlet side camshaft
using the tool (1b). | Name | Country |
|---|---|---|
| 1b | Spanner | 1.852.161.000 |
Refitting
(
Removing
)
Apply adhesive to the thread of the phase
transformer taking care not to obstruct the oil ducts.Fit the timing variator to the inlet side
camshaft, and tighten it using the tool. | Name | Country |
|---|---|---|
| - | Spanner | 1.852.161.000 |
Removing
(
Refitting
)
Place the inlet side camshaft in a vice
fitted with protective jaws.1. Remove the timing variator (1a) from the inlet side camshaft
using the tool (1b) A. | Name | Country |
|---|---|---|
| 1b | Spanner | 1.852.161.000 |
Refitting
(
Removing
)
Apply Loctite 270 to the 3rd variable valve
timing thread, taking care not to block the oil ducts.Fit the variable valve timing to the inlet
side camshaft, and tighten it to the specified torque using the
tool. | Wait 2 hours before fitting the shaft on the head. |
| Name | Country |
|---|---|---|
| - | Spanner | 1.852.161.000 |
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | TIMING VARIATOR | - | 2,4 - 3,1 |