3362612 - 1072B54 sleeves connecting air capacity box to inlet manifold is - r+r

Removing ( Refitting ) Place the car on a lift.Raise the car on a lift. - 7055B54  under-engine guard - r r . Lower the lift. - 1016A40  ignition coil cover on cylinder head- r+r .  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 1056B82  injection/ignition system e.c.u. (one) - r + r- 1040A31 fuel filler pipe - rigid section - r r  - 1056B14  throttle case - r + r . Move the V.I.S. device with swinging air ducts away from its sleeves.  - 1072B10  inlet manifold - r + r and replace seal1. Loosen the bands and remove the sleeves connecting the air chamber to the inlet manifold. Refitting ( Removing ) Place the hoses connecting the air chamber to the intake manifold back in their housings and secure them using the bands. Refit in its seating the V.I.S. device with swinging air ducts  - 1072B10  inlet manifold - r + r and replace seal .  - 1056B14  throttle case - r + r . - 1040A31 fuel filler pipe - rigid section - r r  - 1056B82  injection/ignition system e.c.u. (one) - r + r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal. - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1016A40  ignition coil cover on cylinder head- r+r .  - 7055B54  under-engine guard - r r . Remove the vehicle from the ramp.