3362619 - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r

Removing ( Refitting ) Place the car on a ramp. - 7055B54  under-engine guard - r r1. Undo the nuts securing the exhaust pipe reinforcement bracket to the oil sump.2. Undo the nuts securing the pipe to the catalytic preconverter.3. Undo the bolts securing the pipe to the catalytic converter.4. Remove the rubber block from the pin on the bodywork, then remove the pipe between the precatalyzer - catalyzer. Refitting ( Removing ) Fit the pipe between the precatalyzer - catalyzer.Tighten to torque the nuts securing the pipe to the catalytic converter.

	Fastening	Component	Ø	Value(daNm)
-	Nut	CATALYTIC CONVERTER (ONE)	M8	(To the flexible centre section) 2.5

Tighten to torque the nuts securing to the catalytic converter.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8	2.8

Tighten to torque the nuts securing the exhaust pipe reinforcement bracket to the oil sump.

	Fastening	Component	Ø	Value(daNm)
-	Nut	PRE-CAT CONVERTOR/CAT CONVERTOR PIPE	M10 x 1.25	(Oil sump) 5

 - 7055B54  under-engine guard - r rRemove the vehicle from the ramp.