3362738 - 1820B43 RIGID PIPE from clutch reservoir to (pump) - master cylinder R.R. for right hand drive versions

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 1016A10  sound-proofing cover - r + rRemove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake-clutch fluid reservoir is empty.1. Break the band (1a) and open the band (1b), then disconnect the pipe (1c) from the flexible pipe connector.
1. Open the retaining clips and release the rigid pipe from the master cylinder to the clutch fluid reservoir.2. Break the band (2a), disconnect the flexible pipe (2b), then remove the pipe from the reservoir to the master cylinder (2c) from the engine compartment.
Refitting ( Removing ) Place the pipe in the engine compartment and secure it to the fastening clips on the bodyshell.Connect the rigid pipe to the flexible pipe connector using new bands.Connect the rigid pipe to the flexible pipe on the clutch fluid reservoir using a new band. - 0010T67  hydraulic clutch system bleed air - 1016A10  sound-proofing cover - r + rConnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 5530B56  BATTERY DRIP TRAY COVER - R.R.