3362739 - 1820B45 RIGID supply PIPE from (pump) - master cylinder R.R. for right hand drive versions

Removing ( Refitting ) Place the car on a ramp. - 5530B56  BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 1016A10  sound-proofing cover - r + rRemove the protective cap from the bleed valve of one front brake caliperConnect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake-clutch fluid reservoir is empty.1. Raise the retaining clip (1a) and disconnect the fluid pipe (1b).
Raise the car.1. Open the retaining bands (1a) and release the clutch pump master cylinder rigid supply pipe (1b).
1. Undo the rigid connector (1a), then disconnect and remove the clutch pump master cylinder rigid pipe (1b) from the engine compartment.
Refitting ( Removing ) Lower the vehicle.Place the master cylinder supply pipe in the engine compartment and secure the retaining clips to the bodyshell.Connect the pipe to the master cylinder and close the retaining clip.Raise the vehicle.Tighten the connector for the master cylinder rigid supply pipe.Connect the oil pipe to the operating cylinder and close the retaining clip.Secure the pump master cylinder pushrod to the pedal. - 0010T67  hydraulic clutch system bleed air - 1016A10  sound-proofing cover - r + rConnect the battery negative terminal.

NameConnector
-Battery  A1 
 - 5530B56  BATTERY DRIP TRAY COVER - R.R.