2127C26 PIPE FROM ODD GEARS ENGAGEMENT SOLENOID VALVE TO SELECTOR/ENGAGEMENT ACTUATOR - R.R. - Fiat - STILO - eLearn

3362777 - 2127C26 PIPE FROM ODD GEARS ENGAGEMENT SOLENOID VALVE TO SELECTOR/ENGAGEMENT ACTUATOR - R.R.

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.

Make sure that the gearbox is neutral.

Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
1	"Selespeed gearbox electric pump"	N47

Disconnect the negative and positive terminals and remove the battery. - 1056B82 injection/ignition system e.c.u. (one) - r + r - 1048A31 RIGID PIPE between air filter and intake manifold - R.R.Using a syringe, drain the oil contained in the reservoir.1. Disconnect the connector (1a) and (1b) of the semi-rigid supply pipe from the uneven gears solenoid to the engagement device.2. Remove the uneven gears engagement oil supply pipe.

Refitting ( Removing

) Fit the uneven gears engagement oil supply pipe and tighten the connectors on the actuation unit and selection unit.Connect the electrical connection on the hydraulic selection system pump.

	Name	Connector
-	"Selespeed gearbox electric pump"	N47

- 1048A31 RIGID PIPE between air filter and intake manifold - R.R. - 1056B82 injection/ignition system e.c.u. (one) - r + r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r - 0010T47 hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change - 5530B56 BATTERY DRIP TRAY COVER - R.R.