3362786 - 2127C52 EVEN AND UNEVEN GEAR ENGAGEMENT SOLENOID VALVES - R.R.

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1016A40  ignition coil cover on cylinder head- r+r- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

	Name	Connector
1	"Selespeed gearbox electric pump"	N47

 - 1056B82  injection/ignition system e.c.u. (one) - r + r - 1048A31  RIGID PIPE between air filter and intake manifold - R.R.1. Disconnect the electrical connections of the engagement solenoids (1a) and (1b).

	Name	Connector
1a	Solenoid 1 (gear engagement)	L51

	Name	Connector
1b	Solenoid 2 (gear engagement)	L52

2. Undo the bolts to the hydraulic unit.3. Remove the gear engagement solenoids. Refitting ( Removing ) Fit the engagement solenoids on the hydraulic unit and tighten the fixing bolts.Connect the electrical connections on the engagement solenoids.

	Name	Connector
-	Solenoid 1 (gear engagement)	L51

	Name	Connector
-	Solenoid 2 (gear engagement)	L52

Connect the electrical connection on the hydraulic selection system pump.

	Name	Connector
-	"Selespeed gearbox electric pump"	N47

 - 1048A31  RIGID PIPE between air filter and intake manifold - R.R. - 1056B82  injection/ignition system e.c.u. (one) - r + r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal. - 0010T47  hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change  - 1016A40  ignition coil cover on cylinder head- r+r - 5530B56  BATTERY DRIP TRAY COVER - R.R.