3362976 - 5010B47 side air duct to rear seat(one), lh or rh - r r
Removing
(
Refitting
)
- 5530B56 BATTERY DRIP TRAY COVER
- R.R.Disconnect the battery negative terminal. - 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS POCKET - R.R. - 3380A46 handbrake lever protective boot - r r - 7040L37 gear lever plate - r r - 7040A65 passenger compartment box lock , one , r r - 7065C42 ashtray (one) r+r - 5010C32 air outlet on panel trim for rear seats - r r - 7040L70 TUNNEL COVER REAR TRIM - R.R. - 7040L20 tunnel trim - r r- 5010B58 DUCT BETWEEN CLIMATE CONTROL CASING AND REAR SEAT
AIR DUCT (ONE), LEFT OR RIGHT - R.R. - 7025A24 boot lid opening lever - r+r - 7040L40 front compartment scuff strip - r r - 7040L44 rear compartment scuff strip - r r- 7040L36 armrest on tunnel trim with odment tray and phone
holder r r with tunnel trim removed
To detach the side air duct to the driver's
side rear seats, it is necessary to detach the left rear seat:
- 7050A06 LEFT SLIDING REAR SEAT - R.R.
To detach the side air duct to the passenger
side rear seats, it is necessary to detach the right rear seat:
- 7050A08 RIGHT SIDE SLIDING REAR SEAT - R.R.1. Undo the bolts (1a) fixing the luggage compartment side lining
(1b).2. Unscrew the seat belt retaining bolt.Move the luggage compartment side lining
aside.
Refitting
(
Removing
)
Position the air duct in the
special housing.Fit the nut fixing the duct.Rivet the air duct using a rivet machine
and a 6 mm diameter rivet.Tighten the nut fixing the duct.Secure the electrical wiring to the duct
using appropriate fastening bands.Positino the front sound insulation on
the passenger compartment floor.Position and secure the passenger compartment
carpet using the press fittings.Fasten the rear side covering tightening
the fixing bolts removed previously.Fasten the rear seat belt tightening the
fixing bolt to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | M10 x 1.25 | (Wheel arch) 2.5 |