5040A26 COMPRESSOR MOUNT - R R - Fiat - STILO - eLearn

3362993 - 5040A26 compressor mount - r r

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal. - 1016A40 ignition coil cover on cylinder head- r+r- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling . - 7055B54 under-engine guard - r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right side) - 5530A14 alternator - r+r for versions with air conditioner1. Loosen the air conditioning support fixing bolts.2. Remove the air conditioning support.

The fixing bolts are different lengths, it is advisable to identify the corresponding bolt - opening.

Refitting ( Removing

) Place the compressor support in position and secure it tightening the fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COMPRESSOR MOUNT (AC)	M10 x 1.25	5

Position the alternator in its housing.Tighten the lower alternator fixing bolts.Tighten the positive cable and the supply cable to the alternator.1. Position the alternator wiring as shown in the figure below, so that it is not in contact with the catalytic pre-converter.

Secure the alternator wiring to the retaining bands. - 5040A20 air conditioner compressor - r+r - includes fluid level check and top up if necessary - 5040A73 compressor inlet pipe - r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (right side) - 7055B54 under-engine guard - r r- 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling - 1016A40 ignition coil cover on cylinder head- r+rConnect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.