7050A06 LEFT SLIDING REAR SEAT - R.R. - Fiat - STILO - eLearn

3363442 - 7050A06 LEFT SLIDING REAR SEAT - R.R.

) - 5530B56 BATTERY DRIP TRAY COVER - R.R.Disconnect the battery negative terminal.Move the left rear seat completely back.1. Undo the front bolts fixing the rear seat.

1. Extract the seat belt about 30 cm and lock it as illustrated.

This precautionary measure is needed to facilitate the operation of refitting the seat.

Move the left rear seat forwards into the end of travel position.Open the boot lid.Remove the front and rear parcel shelf. - 7040B10 load platform (luggage platform) trim - r+r1. Undo the rear bolts (1a) fixing the seat and the rear seat belt (1b).Disconnect the Side Bag electrical connector.

	Name	Connector
-	Right rear Side Bag	Q42

	Name	Connector
-	Left rear Side Bag	Q43

Remove the left rear seat.

Refitting ( Removing

) Position the seat in the passenger compartment by the fastenings.Connect the Side Bag electrical connector.

	Name	Connector
-	Right rear Side Bag	Q42

	Name	Connector
-	Left rear Side Bag	Q43

Insert the seat belt in the special passage in the seat cushion.Tighten the front and rear bolts fixing the rear seat and the rear seat belt to torque.

	Fastening	Component	Ø	Value(daNm)
-	Front and rear bolt	LH OR RH FRONT SEAT	M8	2.5

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR. SEAT. BELT MOUNTING TAB.	M10 x 1.25	3.2

Release the rear seat belt from the retainer used during the dismantling. - 7040B10 load platform (luggage platform) trim - r+rFit the front and rear parcel shelf.Connect the battery negative terminal. - 5530B56 BATTERY DRIP TRAY COVER - R.R.