The side lights activated signal is sent to pin 28 of connector
B of the Body Computer
M1
from the steering column switch
unit
H5
.
The 'ignition ON' signal (INT) for the switch
H1 reaches the underdashboard control unit
B2
at pin 11
of connector H and from there moves on to the Body Computer
M1
(pin 9 of connector F).
The side lights are active even if dusk
sensor
K85
is present (signal to pin 7 of connector D of
M1
)
, and AUTO function is set on stalk unit
H5
(signal to pin
2 of connector I of
M1
).
The dusk sensor
K85
is supplied
from the INT line protected by fuse F49 of control unit
B2
;
The lights are also activated by the PARK
button in the switch unit
H90
(signal to pin 17 of connector
H of
M1
).
The Body Computer
M1 controls the supply
for the front side lights F10 (left) and F11 (right) - from pins
30 and 40 of connector B, the rear side lights F30 (left) F31 (right)
and the no. plate lights (in the unit F52 - from pins 5, 6, 9 of
connector D and 38 of connector E).
The Body Computer
M1
is connected,
via the CAN line, to the instrument panel
E50
to manage
the side light activation warning light and the 'light fault' warning
light in the case of faults in the circuit.