The fog lights activated signal reaches pin 35 of connector G of M1 from the control button on switch panel H90 .The side lights activated signal is sent to pin 28 of connector G of the Body Computer M1 from the steering column switch unit H5 . See E2010 SIDE LIGHTS / NO. PLATE LIGHTSThe dipped headlamps activation signal is sent to pin 4 of connector I of the Body Computer See E2011 DIPPED HEADLAMPSThe fog lights activation signal reaches pin 1 of connector I of the Body Computer M1 See E2030 FOG LIGHTSThe ''ignition ON'' signal (INT) for the switch H1 reaches the underdashboard control unit B2 at pin 11 of connector H and from there moves on to the Body Computer M1 (pin 9 of connector F).The Body Computer M1 controls the supply of the rear fog lamp F35 (left) F36 (right), located on the boot lid, from pin 31 of connector E and 20 of connector D.The Body Computer M1 is connected, via the CAN line, to the instrument panel E50 to manage the fog lamps on warning light and the light failure warning light in case of a fault.