2127C49 ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED - Fiat - STILO - eLearn

3362785 - 2127C49 ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED

) 1. Disconnect the electrical connections (1a) and (1b) of the electrohydraulic selection and engagement device.

	Name	Connector
1a	Speed selection potentiometer	K68

	Name	Connector
1b	Gear shift potentiometer	K69

1. Undo the connector (1a) and remove the semi-flexible section (1b) of the uneven gears engagement pipe.

- 4450B02 left front wheel r r - 7055B54 under-engine guard - r r - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.Place a hydraulic lifting device under the gearbox and differential unit.1. Undo the nut securing the gearboc flexible mounting to the rigid mounting.

1. Undo the bottom fixing bolt on the pump mounting bracket.2. Undo the top bolt on the pump mounting bracket.3. Undo the bolts securing the selection device to the gearbox unit.4. Disconnect the reservoir fluid pipe from the selection device.5. Remove the gear engagement electrohydraulic selection device.

Refitting ( Removing

) Fit the gear engagement electrohydraulic selection device.Connect the reservoir vent pipe from the selection device.Tighten the bolts fixing the selection device to the gearbox unit.Tighten the top fixing bolt on the pump mounting bracket.Tighten the bottom fixing bolt on the pump mounting bracket.Raise the gearbox unit until the flexible mounting block is in its seating with the support.Tighten the nut fixing the flexible mounting to the support to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	GEARBOX SIDE RUBBER MOUNT	M12	9

Remove the hydraulic lifting device under the gearbox and differential unit. - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. - 7055B54 under-engine guard - r r - 4450B02 left front wheel r rTighten the connector on the semi-flexible section of the gear engagement pipe.Connect the electrical connections on the electrohydraulic selection and engagement device.

	Name	Connector
-	Speed selection potentiometer	K68

	Name	Connector
-	Gear shift potentiometer	K69