3362590 - 1036C30 CAMSHAFT FRONT OIL SEAL IN CYLINDER HEAD - REPLACEMENT WITH TIMING BELT REMOVED

Removing ( Refitting )     Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.Undo the bolts fixing the cam angle sensor to the camshaft front cap.1. Undo the bolts (1a) and remove the camshaft front cap (1b).2. Remove the inlet side camshaft front supper upper half-bearing.3. Remove the camshaft front oil seal (exhaust side and inlet side).
Refitting ( Removing ) Place the inlet side camshaft front upper upper half-bearing in its housing.Place the camshaft front cap back in its housing and secure it tightening the bolts to the recommended torque.
FasteningComponentØ  Value(daNm)
-BoltCamshaft capsM71.5
For the exhaust side camshaft oil seal.1. Fit the new exhaust side camshaft front oil seal (1a) using the tool (1b).
DescriptionCode
1bFitting tool1.860.824.000
For the inlet side camshaft oil seal.1. Fit the new inlet side camshaft front oil seal (1a) using the tool (1b).
DescriptionCode
1bFitting tool1.860.844.000
Tighten the bolts fixing the cam angle sensor to the camshaft front cap.    Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.