3362793 - 2127E42 hydraulic selection gearbox shift position sensor - r r

Removing ( Refitting )  - 5530B56  BATTERY DRIP TRAY COVER - R.R. - 1016A40  ignition coil cover on cylinder head- r+r- 5530B10 battery - r+r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.Temporarily refit the battery and reconnect the negative and positive terminals.
Make sure that the gearbox is neutral.
Turn the ignition ON.Carry out the Selespeed hydraulic circuit depressurisation procedure using an Examiner tester. 1. Disconnect the electrical connection on the hydraulic selection system pump.

NameConnector
1"Selespeed gearbox electric pump"  N47 
 - 1056B82  injection/ignition system e.c.u. (one) - r + r - 1048A31  RIGID PIPE between air filter and intake manifold - R.R. - 2127C42  HYDRAULIC CLUTCH UNIT AND ELECTRO-HYDRAULIC GEAR ENGAGEMENT SELECTOR DEVICE - R.R. - 4450B02  left front wheel r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 2127C49  ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED1. Undo the bolts securing the sensor to the selection unit.2. Remove the gear engagement position sensor.
Refitting ( Removing ) Fit the gear engagement position sensor.Tighten the bolts fixing the sensor to the selection unit. - 2127C49  ELECTRO-HYDRAULIC SELECTION GEAR ENGAGEMENT - R.R. WITH HYDRAULIC ACTUATOR REMOVED - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 4450B02  left front wheel r r - 2127C42  HYDRAULIC CLUTCH UNIT AND ELECTRO-HYDRAULIC GEAR ENGAGEMENT SELECTOR DEVICE - R.R. - 1048A31  RIGID PIPE between air filter and intake manifold - R.R. - 1056B82  injection/ignition system e.c.u. (one) - r + rConnect the electrical connection on the hydraulic selection system pump.

NameConnector
-"Selespeed gearbox electric pump"  N47 
 - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r Connect the battery negative terminal.- 0010T46 hydraulic system fluid for gearbox with hydraulic selection change  - 0010T47  hydraulic system fluid for gearbox with hydraulic selection check level and top up if necessary - 1016A40  ignition coil cover on cylinder head- r+r - 5530B56  BATTERY DRIP TRAY COVER - R.R.