3362856 - 3330D02 brake servo/brake pump assembly - r r

Removing ( Refitting )  - 1016A40  ignition coil cover on cylinder head- r+r  - 1056B82  injection/ignition system e.c.u. (one) - r + r- 1056B89 ignition/injection system control unit mount (single) - r r for versions with manual gearbox with hydraulic shift  - 1048A31  RIGID PIPE between air filter and intake manifold - R.R. - 1056B14  throttle case - r + r1. Unscrew nut (1a), loosen bolt (1b) and place the tank to one side.
Refitting ( Removing ) Fit the brake servo/brake pump assembly and tighten the retaining nuts on the pedal unit to torque.

FasteningComponentØValue(daNm)
-NutBRAKE SERVOM8(Pedal end) 2.2
Fi the one-way valve to the brake servo assembly.Fit the detent to the brake servo rod.Fit the brake servo rod to its seat on the brake pedal and secure with the detent.Use the appropriate tool to tighten the ABS pipes to the master cylinder.

NameCountry
-Spanner1.856.127.000
 - 3340A13  abs central mount - r r - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. - 3330C30  brake fluid reservoir - r + r and wash inside Fit the Selespeed fluid tank in its seat and tighten the retaining nut and bolt. - 1056B14  throttle case - r + r - 1048A31  RIGID PIPE between air filter and intake manifold - R.R.- 1056B89 ignition/injection system control unit mount (single) - r r for versions with manual gearbox with hydraulic shift  - 1056B82  injection/ignition system e.c.u. (one) - r + r  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.- 5530B10 battery - r+r  - 5530B56  BATTERY DRIP TRAY COVER - R.R.  - 1016A40  ignition coil cover on cylinder head- r+r - 0010T64  brake and or clutch fluid check level and top up as necessary - 0010T65  hydraulic brake system bleed air